产品描述
Copper mould tubes for CCM
Copper mould tubes are used as a cooling spare part for continuous casting machines.
1. Square copper mould tube
2. Rectangular copper mould tube
3. Round copper mould tube
4. Beam blank copper mould tube
5. Non-standard copper mould tube
Square Mould
50X50~650X650
Rectangular (100~500)X650
Round mould Ф110-Ф1500
Design with double taper, triple taper
Multi-taper, parabolic taper and various kinds of continuous taper
Non-standard mould
Beam blank mould
The materials of copper mould tubes should be the ones with good tensile strength, fatigue strength, proper hardness, low elongation and high heat conductivity coefficient. As a result, material like phosphorous deoxidize copper (DHP),CUAG,CR-ZR-CU are widely accepted by users of all countries.
Coatings:
Copper has lower hardness which leads to lower anti-abrasive property. Therefore, the area at the lower part of the moulds, where the stress increases drastically due to shells, will be more severely worn. To increase the life time of copper moulds, Uniform mould interior surface plating with suitable hardness is needed. We use hard chrome plating to increase the life of mould tubes. The plating thickness will be controlled in the best range. As for the coating of copper mould plates, based on our years of experience, we are able to provide Cr coating, Ni-Cr coating, Ni-Fe coating and Ni-Co-Cr coating to meet the demand of various customers both at home and abroad.
- copper mould tube
产能:
未通知
运输时间表:
未通知
Incoterms:
CFR - Cost and Freight
CIF - Cost, Insurance and Freight
FOB - Free on Board
包装明细:
Wooden cases
更多关于
AMK Metallurgical Machinery Group Co.,Ltd
100-200
员工
1M - 2M
销售额(美元)
90%
% 出口销售额
Year
成立年份
业务类型
- Industry / Manufacturer
- Importer / Trading Company
关键词
- Metallurgy
- Machinery
联系方式和位置
- Amy Wang
- +86 510 xxxxxxxx
- Wuxi / Jiangsu | 中国