Dongguan diandaomian Technology Co., Ltd

The rotary encoder is an electromechanical device that can convert the angular motion of the shaft into a pulse signal with a phase deviation of 90 ° between A and B phases, where C is the reference ground for A/B signals
1. The positive and reverse directions can be obtained according to the phase relationship of A/B signals.
2. The number of rotating steps can be obtained by counting the pulses.
3. The angular velocity can be obtained according to the counting of pulse in unit time.
In addition, the axis of the rotary encoder can not only rotate horizontally, but also move up and down to realize the function of keys


Product parameter description

Control part orientation：Vertical/Horizontal
Actuator configuration：Flat/Serrated
Number of detent ：30
Number of pulses ：15
Pulse direction ：Positive direction
Detent torque：10-200gf.cm
Push-on switch ：with/without
Travel of push-on switch：0.5mm
Ratings :10mA DC 5V

             
Actuator configuration

Half round D-shaped handle(Flat)/Plum shaped handle(Serrated)
Actuator length
Total length:
L=10 D=5 F=4
L=15 D=7 F=7
L=20 D=7 F=10

Output Specifications

Number of detent :30/20
Number of pulse :15/20