Pansto pump

D, G, and GH series pumps are all horizontal centrifugal pumps with a single pump casing structure. 2. Special clamps are used to clamp the pump body and pump cover. The direction of the pump outlet can be at any position 360 degrees, making it easy to install and use. 3. The bearing assembly of the pump adopts a cylindrical structure, which is convenient for adjusting the gap between the impeller and the pump body, and can be completely dismantled during maintenance. The bearings are lubricated with grease. 4. The shaft seal forms of the pump include packing seal, impeller seal and mechanical seal. 5. The pump has wide flow channels, good cavitation performance, high efficiency and corrosion resistance. 6. The transmission methods mainly include V-shaped triangle belt transmission, elastic coupling transmission, gear reduction box transmission, hydraulic coupling transmission, variable frequency drive device, thyristor speed regulation, etc. 7. The material of the current-passing parts is high-hardness wear-resistant alloy cast iron. 8. Use multiple speeds and multiple variations to enable the pump to operate under optimal working conditions. It has long service life and high operating efficiency, and can meet many types of harsh conveying conditions. 9. The GH pump is a high-lift pump. It is mainly used for the continuous transportation of highly abrasive materials whose particles are too large to be transported by ordinary slurry pumps. It is suitable for dredging, sucking gravel, dredging rivers, mining and metal smelting explosive slag transportation, etc.